T-300K led pixel controller,suppor many kinds of IC(8192pixels),can be controlled via PC;T-300K rgb controller - SC-T-300K

1.T-300K led pixel controller, 2.control 8192 pixels, 3.support many kinds of IC, 4.Warranty:2years, 5.CE&RHOS - details see: https://www.lightinghere.com/t-300k-led-pixel-controller-suppor-many-kinds-of-ic-8192pixels-can-be-controlled-via-pc-t-300k-rgb-controller-10000946

Place of Origin: Guangdong China (Mainland)	Brand Name: SCOTT	Model Number: SC-T-300K	Type: LED pixel controller
Max. Load Power: 8W	Voltage: 220V	Work Temperature: -30℃~85℃	Size: L270mmW180mmH55mm
Weight: 1.35kg	Control Pixel Number: 8192 pixels

T-300K led pixel controller,suppor many kinds of IC(8192pixels),can be controlled via PC;T-300K rgb controller

1.T-300k System features

32—256 grade Gray level,Support software Gamma correction.

Support the rules and special-shaped handle.

8 ports output,one port can support 512-1024 lamp pixels.
On-line (also can SD Card) control,offline controlCan be multiple controllers used in combination, the contents of the line control program stored in the SD card.
Compatible with single line or doubleline chips.
If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 M

Note: the T-300 K controller offline control, each machine controller must put a SD card.

2012 Edition T-300K controller can only be combined with the new version software LedEdit2012 . Using the old software does not support the new version of the controller, the new version of the controller has been printed the Chinese sign.

2.Support chips:

Support chips:	Software code& Controllertype	Lamps/(MAX)	NOTE
LPD6803,D705,1101,6909, 6912	T-300K-6803	8192	32 grade gray level
LPD8806,LPD8809	T-300K-8806	4096/8192
TM1803,TM1804,TM1809,TM1812	T-300K-TM	4096/8192	TM1804&TM1809Divided intohigh speed and low speed
TM1903,TM1904,TM1909,TM1912	T-300K-TM19	4096/8192
UCS6909,UCS6912,UCS7009,UCS5903	T-300K-UCS32	8192
UCS1903,UCS1909,UCS1912	T-300K-UCS256	4096/8192	Divided intohigh speed and low speed
UCS3903	T-300K-UCS1024	4096/8192
DMX512	T-300K-DMX	1360/4096	Compatible with standard DMX512
WS2801,WS2803	T-300K-WS	4096/8192
WS2811	T-300K-WS2811	4096/8192	Divided intohigh speed and low speed
DS189	T-300K-DS189	4096/8192
TLS3001,TLS3002,TLS3008	T-300K-TLS	4096/8192
P9813	T-300K-P9813	4096/8192
SM16715	T-300K-SM16715	4096/8192	Divided intohigh speed and low speed
SM16716	T-300K-SM16716	4096/8192
BS0901,BS0902	T-300K-0901	4096/8192
BS0815	T-300K-0815	4096/8192

NOTE:if chip is 256 grade gray level and Single-line IC choose .When programming choice high speed mode and one interface controls 1024 lamps the play speed can reach 30 frames/s. Double-line IC or single-lineIC with low speed , one interface controls 512 lamps the play speed can reach 30 frames/s.

3.Appearancepicture

4.The meaning of flag

TTL signal(245 signal):

AC IN	Exchange 220V power supply	COM(common port)	GND (ground wire)
POWER	POWER LIGHT	DAT	Signal
STATUS	Status light	CLK	The clock line
SD CARD	SD card slot

NOTE:According to TTL signal output,Ground of the controller must be connected to the lamp ground.

5.System architecture figure

Note:The IP address of the computer should be set to: 192.168.60.178

6. wiring diagram

Note:

If the distance between controller and lamps more than50mwe suggest using differential signal transmission control or Photoelectric isolated signal transmission control,please read the manual carefully.Signal lines must be acable,the best is Super five kinds of cable.

8. Specific parameters:

Memory card:

Type:SD card(if controlling so many lamps it is best to use the high-speed SD card.)

Capacity:128MB—2GB

Format:FAT

Store file:*.led

Packaging Detail:1pcs/box

Delivery Detail:1~3days