SD Card controller for 6803IC/8806IC/2801IC.DC5V/12VDC - T-1000S

1. Output current: <4A* 3 Channels, 2. 5V, 12V, 24V available, 3. Powe:60W(5V), 144W(12V),288W(24V) - details see: https://www.lightinghere.com/sd-card-controller-for-6803ic-8806ic-2801ic-dc5v-12vdc-10001244
Place of Origin: Guangdong China (Mainland)Brand Name: COXOModel Number: T-1000SType: Manual Switch
Max. Load Power: 2048Voltage: 5-24VIC No: 2048 
SD Card controller for 6803IC/8806IC/2801IC.DC5V/12VDC
contact supplier for SD Card controller for 6803IC/8806IC/2801IC.DC5V/12VDC


Specifications

RGB pixel controller 2048 pixels SD card t-1000 controller led pixel controller rgb led controller CE& ROHS

T-1000S

features

1,32—256 Gray,Gamma correction procession software

2,Support the rules and special-shaped handle.

3,Single-port output,can support 1024/2048 lights

4,Off-line control, play back content stored in the SD card

5,T-1000C store a maximum of 16 documents,copy multiple files to the SD card in order

Note:

1..T-1000C-port 512 lights, the playback speed of up to 30 frames / sec, the port more than 512 lights, the frame rate with the increase in the number of lights automatically reduced.

2. Display files naming: when placing one file, copy the software-generated display file to the formatted SD card, when placing multiple files should be named as “00led”,”01led”,”02led”…(00means the first display file, 01means the second, and so on)

Support chips:

Support chipsLedEdit corresponding

model

Single one support lightsRemarks LED pixel RGB
LPD6803,D705,1101,6909,6912T-1000-68032048pixels
LPD8806,LPD8809T-1000-88062048pixels
TM1803,TM1804,TM1809,TM1812T-1000-TM2048pixelsTM1804 and TM1809 are divided into high and low
DMX512T-1000-DMX170/512pixelsCompatible standard DMX512agreement
WS2801,WS2803T-1000-WS2048pixels
TLS3001,TLS3002T-1000-TLS2048pixels
P9813T-1000-P98132048pixels
SM16715T-1000-SM167152048pixels
SM16716T-1000-SM167162048pixels
BS0815T-1000-08152048pixels
Match 6909,6912 Guardrail tubeT-1000-HL321024pixels×sub-control quantityMust connect sub-control board

Screen printing definition :

7.5-24V

DC power input, to provide two sets of power input, select a group can be.

5V
GNDPower Ground
ERRORError indicator
POWERPower LED
SD CARDSD card slot
CLKOutput signal CLK
DATOutput signal DATA
GNDSignal ground
B

Compatible with DMX,differential A(DAT+),and differential B(DAT-).

A
GNDSignal ground

Regulatory function button:

SETSave Settings to save current settings file and the playback speed
MODESwitch File
SPEED+Speed up the playback speed
SPEED-Slow down the playback speed

Controller on the SD card can not be hot swappable, plug the SD card every time, you must first disconnect the power supply controller

question:

Question 1: After power, the T-1000C ERROR indicator has been flashing without display output

Answer: The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:

1.SD card is empty, with no effect file

2.The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file led

3.SD card did not format to FAT before copy effect files

4.Please check the supply power voltage, the controller can be individually powered to exclude power reasons

5.Changing the SD card and then test to exclude the possibility of a bad SD card

Question 2: The controller is powered on, the indicator is normal, but no effect change in lighting

Answer: The reasons for this are as follows:

A. Check if the lighting′s signal line and the controller connected correctly

B.If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together

C.heck if the model chose during making display files on the SD card match the chips used in the lighting.

Packaging Detail:50 pcs / box
Delivery Detail:3-5Days

Related Product for SD Card controller for 6803IC/8806IC/2801IC.DC5V/12VDC