new! Backlight RF Wall Mounted Touch dimmer 230V/12V - SR-4113

mini PCBA Constant current driver, With PWM output, 350ma-700ma, 12-24V DC - details see: https://www.lightinghere.com/new-backlight-rf-wall-mounted-touch-dimmer-230v-12v-10002682
Place of Origin: Guangdong China (Mainland)Brand Name: SunricherModel Number: SR-4113Name: PCBA mini LED Driver
Input Voltage: 12-24V AC/ 8-24V DCelectric current: 350ma 700ma constant currentMax output Power: 9WTa: 50℃
Tc: 85℃Approval: CE&ROHSCan work with: PCBA mini led pwm dimmerDimming: PWM dimming and Linear dimming
Warrantly: 3years   
new! Backlight RF Wall Mounted Touch dimmer 230V/12V
contact supplier for new! Backlight RF Wall Mounted Touch dimmer 230V/12V


Backlight RF Wall Mounted Touch Panel
Biclor Controller

Input voltage----------------100V-230VAC/12-36VDC
Output------------------------RF signal
Size---------------------------86mm*86mm*35mm

1. Switch
Touch on/off button, all zones on/off,Blue when playing. Yellow when off.
Each time turn on, the default setting is stay at single color control.
Touch zone button Z1/ Z2/ Z3/ Z4 over 2 seconds, it will turn on/off separately.
The backlight blue is the zone on, yellow is the zone off.
Brightness/Kelvin control exchange,
blue under brightness control mode,
Yellow under Kelvin control mode.
4 zones, control seperately or
syhchronously, each zone could
control multiple receivers.


2. Learning ID with 1009 series
Re: Click learning button on RF receiver (1009)→
Short Touch a zone button Z1 or Z2 (sender 2830)→Touch color slider
The light flick means ID learnt successfully.

3. Save and replay
Save: Touch color wheel to get a color→
Hold any button of S1/S2 over 2 seconds(4zones work together)
The light flick means successfully saved.
Replay: Short touch button S1/S2 →Replay the scene just saved.
Note:
This controller is RF signal to receivers, no need cable.
AC version no need driver, working directly at electric supply 100-230VAC.
The DC version need a driver 12/24V.

OTHERS:

sr-2818/2819/2820/iphone/Android all pare with 1009 series receiver

SR-2819

SR-2820

SR-2818

SR-2818 RGBW remote controller is full touch remote controller which has 8 different zones. It can get Red/ Green/ Blue/ White color directly. The remote controller can save up to 8 colors or 8 modes into corresponding buttons (1-8 buttons) for each zone. You can choose any color through color wheel. There is a USB port to charge internal battery.

Sender: (SR-2818)

Operation voltage: 4.5VDC

Operation frequency: 434MHZ / 868MHZ

Battery: Lithium battery.

Receiver: (SR-1009FA/ SR-1009F3/ SR-1009F7))

Input voltage: 12-36VDC

Output voltage: 12-36VDC

SR-1009FA: 4 channels x 5A, 34channels x (60-180W)

SR-1009F3: 4 channels x 350mA, 4 channels x (4.2-12.6W)

SR-1006F7: 4 channels x 700mA, 4 channels x (8.4-25.2W).

Note: SR-2818 can also control WIFI receiver (SR-1009FAWi/ SR-1009F3Wi/ SR-1009F7Wi). When WIFI receivers are not controlled by software, then you can use SR-2818 remote. The operation will be the same.


Reg.
1). 1009FAWI could control by IPHONE software or SR-2818. No need 2818 WITR.
2). 1009FA works with 2818 like 2806 works with 1003RC.
3). 1009FA+2818WITR=1009FAwi.
4). One 2818WITR could connect countless 1009FA, so on some point, this means save cost.

RGB controller

led controller

1. high sensititvity and stability of touching color wheel
2. enable to control 2 zones . Each zone can switch on/off separately
3. changing modes of 2 zones can be synchronized without any confusion
4. 1 changing mode, enable to stay at any color under situation of color changing mode
5. adjustable changing spped with 8 levels, quickest speed is 4S, slowest spped is 256S
6. control RGBW/RGBY 4 colors that achieve more selectable colors than tradistional RGB control

Packaging Detail:pp bag package white box
Delivery Detail:5-15days

Related Product for new! Backlight RF Wall Mounted Touch dimmer 230V/12V