metal halide light 150w (can be both cool and warm start - G05-150w

metal halide light, Advantage: can be warm start &warm start,long life, Output:150w, Input:180V~260V AC(50~60HZ), Life: >6000hrs - details see: https://www.lightinghere.com/metal-halide-light-150w-can-be-both-cool-and-warm-start-10019949

Place of Origin: Taiwan

Brand Name: GHC

Model Number: G05-150w

metal halide light

150w metal halide light

Best advantage is able to be warmstart and save power then save money FOR YOU !

Advantage:
> 1) Warm start is avaiable (others is cool start),

> 2) GHC metal halide light is digital type, working very stable ,power factor is 0.94, and our 150w can replace exisitng transformer type metal halide 300w-400w light in the market . and long life span and save power !

> As you know most of exiting type in market is voltage transformer type, power factor is very bad (drop very fast from 0.8-.0.85 to 0.4~0.5, that's why this light life is short and not stable, it is controlled by a capcitor inside , as voltage always not stable and this capcitor was very easily decreased,as long as it decreased it need more input power and waste of power !

> 3) good quality and reasonable price !

> 4) with strong R&D team to develop.

SPCIFICATION AND DATA:

General
1.Operation Temperature Range	-40°C~+50°C (ballast case surface less than 85°C
2.Storage Temperature Range	-40°C~+85°C
3.Ballast life span	>6000hrs (Room Temperature typically)
Electric Output data
4.Output wave	100~750Hz Square wave
5.Nominal output wattage	150±15W
6.Open circuit protection	Closing output within 10mins without any damage caused to ballast.
7.Short circuit protection	Closing output within 4 seconds without any damage caused to ballast
8.Max. Output Current	3.5A at ignition and 1A after one Minute
9.Max. output Wattage	200W(after one Minute)
10.Nominal output voltage	80~130V
11.Start voltage	17KV~26KV
Electric InputData
12.Operating voltage range	AC:180V~260V(50~60HZ)
13.Max instantaneous current	3.0A
14.Max static input wattage	Under 4W
15.Power Factor (PF)	>90% (after 3 minutes of power on)