China wholesale RL11 UVC lamp Electronic Ballast RL11-425-40 - Nanhai-130600031
UVC lamp electronic ballast;, uv germicidal lamp electronic ballast;, 230V 50-60Hz ballast;, RL11-425-40 ballast - details see: https://www.lightinghere.com/china-wholesale-rl11-uvc-lamp-electronic-ballast-rl11-425-40-10000666
Place of Origin: Guangdong China (Mainland) | Brand Name: NanhaiPCT | Model Number: Nanhai-130600031 | Style: Electronic |
Usage: Other | Matched Tube: T5 |
Electronic ballasts greatly benefit the operation of UV lamps, not only bring high efficiency, but also extend the lamp life.
NanhaiPCT supplies high quality electronic ballasts, which have earned wide reputation for theirs safe and reliable performance. Electronic ballasts greatly benefit the operation of UV lamps, not only bring high efficiency, but also extend the lamp life.
This model RL11-425-40 can be used to macth with the below UVC lamps:
RL11-425-40 | |||||||||
Lamp Type: | GPH793T5 | GPH843T5 | G36T5 | Installation Requirement: | |||||
TUV36T5 | TUV36W | TUVPL-L36W | LED Specification: | VF=1.8-3.6V | IF=5-20mA | ||||
Wiring Diag: | A | Max. cable length between the ballast and the lamp: 1.5m | |||||||
Lamp Type: | GPH212T5 | GPH287T5 | GPH357T5 | GPH436T5 | |||||
TUV11W | TUV16W | Mounting Restrictions | |||||||
Wiring Diag: | B | Disconnect Input Power Before Installing or Servicing | |||||||
Ballast Case Must be Grounded | |||||||||
Technical Specificsations | Don't short any two wires of the input and output wires | ||||||||
AC Source: | 198-264V | For indoor use only | |||||||
Mains Frequency: | 50/60Hz | ||||||||
Power Factor: | >0.90 typ. | Features | |||||||
Efficiency: | >85% typ. | Electronic ballast for one or two lamps operation | |||||||
Operating Frequency: | 43KHz | To be used with four-wire or two-wire lamps | |||||||
Dimmensions: | 165*38*26mm | Instant start | |||||||
Input line length: | 430mm | Lamp status indication via DC signal output(Connected LED Requirement) | |||||||
Output line length: | 480mm | DC 5V±5% (5mA): lamp on | |||||||
Signal line length: | 480mm | DC 0V: lamp fault or no lamp | |||||||
For applications with less than one switch-on cycle per day | |||||||||
(otherwise preheat start ballast are recommended) | |||||||||
Applications | |||||||||
All areas of applications include UV lamps: | |||||||||
Air purification | |||||||||
Aquarium | |||||||||
Industrial water treatment | |||||||||
Article No. | Type | Input Power [W] | Input Current [A] | Power Per Lamp [W] | Lamp Current [A] | Weight [kg] | Packing [mm] | Qty [pcs] | GW [kg] |
8600112101 | RL11-425-40 | 42-48 | max. 0.23 | 1*36-41 | 0.39-0.43 | 0.21 | 446*310*145 | 40 | 9.4 |
24-49 | max. 0.24 | 2*10-21 |
More technical specifications, please go to our website to get more information:www.nanhaipct.com
Packaging Detail:By boxes |
Delivery Detail:3-7 days |