Ceramic lamp end fitting - JH-DZ-xxx

1.Made of alumina or steatite, 2.Fine electrical performance, 3.Resis high temperature, 4.Anti-chemical, 5.Can be custom made - details see: https://www.lightinghere.com/ceramic-lamp-end-fitting-10000426
Place of Origin: Hunan China (Mainland)Brand Name: JinghuiModel Number: JH-DZ-xxxMaterial: Steatite, alumina
Certification: RoHSStyle: OtherRaw material: Steatite or aluminaColor: White
Size: On the requestSpecification: On the requestSurface finish: GlazedCertificate: RoHS, REACH
Application: For various of lamps   
Ceramic lamp end fitting
contact supplier for Ceramic lamp end fitting

Product description:

1.95% alumina or steatite ceramic.heat compression molding,the alumina has been to improved insulation and mechanical strength.

2.The ceramics have no cracks,no burrs,no pinholes,no gaps,and no impurities, surface is smooth, dye absorption is passed.

3.Linear dimension tolerance ≤ ± 0.05mm, diameter tolerance ≤ ± 0.1mm, hole size distortion ≤ 0.05mm, circumference deformation size ≤ 0.1mm.

4.Insulation Resistance ≥ 100MΩ (have been checked by megohm in DC500V).

5.Dielectric Strength: AC2000V/50HZ/1min no breakdown phenomenon.

6.Linear expansion coefficient is slight,and less than 7.0 × 10-6mm /°C, and good for thermal shock performance.

7.Sintering temperature is 1350 °C, the use of a temperature not lower than 1100 °C, good corrosion resistance.


Widely used as holder of lamp.

Packaging Detail:Inside package: polybag with air bubble; Outer package: exported carton
Delivery Detail:3~4 weeks after receipt of deposit

Related Product for Ceramic lamp end fitting