LPD6803 LED pixel - 1515ICRGB

LPD6803 LED pixel, 1. LPD6803 Chip, 2. addressable, 3. RGB LED - details see: https://www.lightinghere.com/lpd6803-led-pixel-10035051

Type: Profile Spotlights	Light Source: Induction Lamps	Input Voltage(V): 5	Lamp Power(W): 0.3
Lamp Luminous Flux(lm): 15	Lamp Luminous Efficiency(lm/w): 45	CRI (Ra>): 80	Color Temperature(CCT): RGB
Working Temperature(℃): -30 - 40	Working Lifetime(Hour): 50000	IP Rating: IP65	Certification: CE,RoHS
Emitting Color: Changeable	Base Type: iPixel LED	Place of Origin: Guangdong China (Mainland)	Brand Name: iPixel
Model Number: 1515ICRGB	Controller: DMX 512	SPI: SD controller

LPD6803 LED pixel

12mm Diffused Flat Digital RGB LED Pixels LPD6803
1.DC5V.0.3W/pcs
2.Strand of 50pcs, 8cm wire length between each LED
3.SD controller,DMX512
4.CE,RoHS

Specification:

IC	lpd6803
Model NO.	SJ-12-ICRGB
Power Consumption	0.3W
Work Voltage	DC5V
Beam Angle	≥120
LED Quantity	1pcs
Color	Full color(ICRGB)
Dimension	12mm
Waterproof Grade	IP66
Work Temperature	-40-60°C
Life-span	50,000H
Certificate	CE&RoHS
Warranty	3 years

The LPD6803

The LPD6803 is similar to the D705. It’s also SPI driven, has 5-bit per channel, and has a choice of gamma correction. However, instead of different chips, this chip decides on using gamma-correction or not by pulling a pin low or high. Gamma-correction thus doesn’t depend on which chip used, but on the circuit of the LED-strip. Another thing to note is that these chips do not have an onboard oscillator, and the PWM runs off the SPI clock, so you’ll have to keep that running to actually use PWM.

Summarized:

SPI (two-wire)
5-bit per channel (15bpp), but needs SPI clock to stay active
3v to 5.5v operating voltage
Gamma-correction, but depends on LED-strip circuit

Packaging Detail:350pcs/bag 3150pcs/carton carton size :48*37*28cm

Delivery Detail:Approx 1-7 working days