Induction Lamp with high qualities and competitive price GL-40 - GL-40

High frequency induction lamp working principle :

Induction lamp is based upon electromagnetic induction and fluorescence gas discharge two knowledge principles to combine.

Technical specific:

Detailed Product Description

Features as below:

-with Pear bulb shape lamps 40W-200W

(Color temperature 2700k~6500k are available, 160V~265V as customers' requirement)

-application: Indoor and outdoor environments

Quality warranty:

-3 years warranty

-60000 hours lifespan

-EMC passed

-products are CE, TUV, CCC, CB certificates approved

-MOQ: 100 Sets

Relative products advantage & technical specification:

-high lumen efficiency, low power consumption -lumen depreciation: <30 %( in the 60,000HRS)

-instant switch on

-no flicker and glare

-Color rendering index: Ra>80

-color temperature: 2700K-6500K

-wide voltage: 160V-265V

-wide range power: 40W-200W, can instead of HPS and Incandescent lamp and so on. -power factor: ≥0.98

-lamp working frequency: 2.65MHz

-wide working temperature: -50~ 50 Centigrade

Our advantage:

-biggest and professional producer in induction high frequency generator (lighting ballast) and fixture

-strong R & D term

-strict quality control system

-superior after sale service

-quick problem solution

High frequency induction light makes the world more energy-saving &Eco-environment.

1. 60,000 hours lifespan and stable working character can save a lot in cost of maintenance, replacement & repairing

2. High efficiency & power factor save electricity consumption more than 60% comparing to ordinary light. This contribute more in Carbon-dioxide emission

3. No liquid mercury can lighten chemical pollution comparing to other ordinary light

Advantage:

• Shockproof and long lifetime.There is no filament and electrode in the High Frequency Induction Lamp; it is based upon electromagnetic induction and fluorescence gas discharge two knowledge principles to combine. There is no necessity element to limit the lifetime of the lamp, and it is unafraid shack. So the lifetime of the lamp just rest with the quality of the electronic component, circuitous philosophy and the debugging technique. The lifetime of the High Frequency Induction Lamp is above 60,000 hours, it can reduce frequent maintained to save expensive cost.
• Energy-Saving.To compare with the filament lamp, using H.F.I.L can save energy 75%, infact, the 120W H.F.I.L can be instead of 250W M.H.L
• Environmental Protection.It use solid mercurial, so even if the bulb is broken, it can’t cause environment pollution. Above 99% recoverable coefficient, a really environmental protection green light.
• Operating temperature range: -30°C~+50°C
• None Flicker.For its work frequency as high as 2.65MHZ, the common lamps’ just is 50HZ, so it called “no flicker completely”. Even using it long time also can’t cause the eyestrain and keep the health of the eyes
• High Color Rendering.It uses tricolor fluorescent coating, so the color rendering is bigger than 80, that is higher than H.V.S.L and mercury lamp. The bright color is soft, the object appear natural color in light.
• Color Electively.There are 2700OK~6500K color for choice and it can be made to color to using in the park adornment and sight lighting.
• Needless Hot Spotting.It can start in low temperature, start and again start immediately. Its start time is less than 0.5 sec.. This type lamp isn’t limited by frequent start and close. It also no light decay like the common electric discharge lamp.
• Good Electric property.Lining with the GB standard,power factor higher than 98%, low harmonic current, lumen output is unacted on the power supply and output invariable luminous flux , it can stat effectually between 160V-265V.
• Unafraid Shack
• Windy Fitting Applicability.Compact glass envelope design to make the fixture design has more degree of freedom. The finished Lamp can be loaded on any position, unlimited.

Application:

Instantly starting and restarting made it be the most ideal lighting applying intunnel

Low working temperature made it substitute thetraditional metal halide lamp.

Maintenance free made it to apply instreet lightusefully.

Factory, exhibition hall, supermarket, square, gas station, airportand so on. Especially for the dangerous and hard maintenance areas.

Our Packaging details :

Each set (bulb and ballast )with with inner box( color box)(As the pictures below),tensets in a solid carton with wood outside.

We can use it here:

The engineering we did before :

Please let us know if any questions.

.......................... Thank you ..............................