wireless Led RGB Controller - WM-C1

wireless Led RGB Controller

Dimension: 114mm*56mm*22mm

DC12-30V input

controlling channel: 4 channel, with R, G, B ,W,

Max current output each channel:1000ma

max voltage output:26V

RF receiving frequency:433.92mhz

the five keys' function

1. Technical Parameters(remote control)

1:Power supply: AAA battery * 3pcs

2:Cover Material ABS

3: Fabrication processing: multicolour printing & UV varnish

1. Technical Parameters(controller)
   1. Working voltage:DC12V
   2. Output control: 3 circuits(R/G/B)
   3. Control current 6A/circuit
   4. Connecting mathod: common anode
   5. Dimension: L58*W70*H28
   6. Receiving range:20meters
2. Functions of Keys
   1. Key 1: on/off
   2. Key 2: light changing mode(15 modes)
   3. Key 3:color light/white light switching mode
   4. Key 4: turn up(brightness/speed)
   5. Key 5: turn down(brightness/speed)
3. How to use
   1. Press Key 1 to turn on/off in any state.
   2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.
   3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring.
   4. Resume fuction. The previous settings will be resumed while power on again.
   5. Matching code

Press Key 4 once within 3 seconds when power on again,.the light will blink 3 times if matching is successful.

Clearing Code

Press Key 4 five times within 3 seconds when power on again,.the light will blink 6 times if clearing is successful.

Touch ring:

Touch ring is high sensitive touch sensor,work with finger touch