T8 LED tube light casing - LEZ-8-MC

good quality, excelent service, best price,customized design - details see: //www.lightinghere.com/t8-led-tube-light-casing-10000486
Place of Origin: China (Mainland)Brand Name: LEZModel Number: LEZ-8-MCMaterial: Aluminum+PC
Shape: OvalStyle: T8 tube lightPart: 1/2Aluminum heat sink+ 1/2PC cover+ two end capsPC Color: transparent or milky
Length: 600mm,900mm,1200mm,1500mm and can be customizedTransmitance: 85%-90%PC Material: Teijin or MistubishiAluminum: 6063
Model: T8 tube light partsTecnique: extrusionApplications: housing, factory, school, office.etc... 
T8 LED tube light casing
contact supplier for T8 LED tube light casing


Product name:
T8 LED tube light kits
Serial number:
LZPC-8-MC
Specification:
26mm*1.0mm
PCB size:
10.0mm×1.0mm (width×thickness)
Assembling:
1/2 PC cover + 1/2 heat sink + two end caps
PC cover type:
1: Transparent
2: Transparent with inner strips
3: Diffused
Material:
1: Polycarbonate
Transparent PC Material / Milky Diffused Material
Raw material mode:
PC-3110ZHP,PC-1250Z-100,PC-S2000UVR,PC- 2215,PC-EKD2108.
Flame retardant: 94-V2, 94-V0
2: AL 6063 (6063-T5 navigational aluminum)
Power supply device:
Interior power supply
Transmittance:
2: Diffused PC cover ≥ 87%.
Beam angle:
≥ 168°
Features:
1: High transmittance,
2: Uniform luminous,
3: Anti-yellowing: not going yellow in 3-5 years ,
4: High anti-UV index,
5: Good freezing resistance: Non-embitterment above -50°C ;
6: High thermo stability: without distortions below 130°C.
7: Glow-wire test past 650°C.
8: The 6063-T5 aviation aluminum is good at rapid heat
dispersion.
9: The warranty can be up to 5 years, under the proper
temperature conditions in doors.
Report:
We can supply the material reports: UL,MSDS,SGS,REACH and so on.
Test methods:
1: Salt mist test,
2: High free drop anti cracking test,
3: high and low temperature test,
4: Anti-yellowing in outdoor exposure test.
Inspection accordance:
professional standards
Tips:
1: The general problem of the PC cover mostly refers to appearing
irregular cracks in the use of the tube lighting, which is mostly
caused by chemical substances. The reason is that the
prestress of the polycarbonate and BPA of the raw material can
produce chemical reaction when they meet chemicals.
2: In case rise the problem as above, Paying attention to not
applying some substances as following:
A: Industrial Thinner,
B: Alcohol,
C: Plate washer water
D: The instant glue whose PH≥6.
E:The printing ink on the PCB and the glue on the leds should
apply materials with the property of un-printing and volatility.
Packaging Detail:about 100sets per cartons, For Aluminum heat sink will be protected by peal catoon.
Delivery Detail:less 2000 sets, about 7 days; 2000-10000sets, about

Related Product for T8 LED tube light casing