LED WIFI RGB controller;controlled by for Iphone,Ipad,Android smart phone;DC12-24V input;4A*3channel output - WIFI-310

Item version: Single color version and RGB version.

1. Working Voltage: DC7.5-24V

2. Output channel: Can be used 3/2/1 channel

3. Output current: 4A*3

4. Connecting method: Common anode

5. Dimension: L105.5*W45*H23mm

6. Remote distance: 50 meters indoor, 100 meters outdoor

7. Software: Android system (at least version 2.3 with WIFI function) or IOS system,

Language : English/Chinese.

8. Receiver sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),

802.11g OFDM(-15dBm)

9. Connect way: V+ R, G, B for LED Light, V+, V- for Power supply, ANT for WIFI signal reception.

10. Reset button(inside the controller):Short press: change from gradual change to strobe flash for

single color Version. Or change in 27 modes for RGB Version.

Long press(more than 20s): Restore to factory settings. WiFi

SSID for connection is “LEDnetXXXXXXXXXX”, password: “88888888”. IP: 192.168.10.1

How to use

1) Color ring: Press the color ring, choose any color as your request. The Color state shows your

choice.

2) Brightness bar: On the left, it is the Max. brightness, on the right is the Min. brightness

3) Run key: Invalid in static color, valid for dynamic modes.

4) Open: ON/OFF.

5) 20 built-in modes:

Press M-/M+ to choose the mode, you can adjust the speed at the same time. Total 31 grades:

"1" is the fastest grade; "31" is the slowest grade. Please the built-in mode form of RGB Contro

How to use

1) Color ring: Press the color ring, choose any color as your request. The Color state shows your

choice.

2) Brightness bar: On the left, it is the Max. brightness, on the right is the Min. brightness

3) Run key: Invalid in static color, valid for dynamic modes.

4) Open: ON/OFF.

5) 20 built-in modes:

Press M-/M+ to choose the mode, you can adjust the speed at the same time. Total 31 grades:

"1" is the fastest grade; "31" is the slowest grade. Please the built-in mode form of RGB Control

How to use

1) Brightness: you can change it from 0 to 100%

2) Speed: For “Strobe flash” and “Gradual” mode, Speed is adjustable. Total 31 grades

"1" is the fastest grade; "31" is the slowest grade.

Cautions: 1. Make sure the right connection for WiFi controller

2. Read the manual before use the controller.

3. When forget the password, open the control box, power up and

long press the reset button (more than 20s): Restore to factory

settings. WiFi SSID for connection is “LEDnetXXXXXXXXXX”,

password: “88888888”.

4. Set the right controller mode(Single or online mode) for WiFi

controller.