High Quality Cheap Magnetic Induction Grow Lights - DL-GK20E

High Quality Cheap Magnetic Induction Grow Lights

1.Specification of high bay ----products technical parameters ofmagnetic induction grow lights

2. Technical data of light source

3. Product features ofmagnetic induction grow lights

(1)Die-cast aluminum electrical box: electrostatic spray coating, corrosion resisting.

(2) Rectangular electrical box, with built-in silica gel ring. Water proof and dust proof, highly improved power working life.

(3) Reflector is made of 1mm pure aluminum plate by one time through pressing, knurled lamp shade, looks beautiful.

(4) Pure aluminum reflector by professionally designed which greatly improved luminous efficiency.

(5) Optional configuration for lamp shade, 5mm thick toughened glass with sealed silica gel ring, water proof and dust proof.

(6) Two ways to mount the light, hook or chain pendant.

(7)100 hours of professional aging test, stable performance. Greatly reduces maintenance cost.

(8) No flash, instant-on, greatly reduces fatigue of the eyes while working under this light, improving work efficiency.

(9) Liquid mercury free: Not harmful to mankind and environment. Low harmonic content: THD≤8%, meet the international L class standard.

(10)Adopt energy-saving electronic ballast to provide high power factor, low current, and reduce electric charge cost.

(10)Package case passed vibration test. The safety during transportation is strengthened.

4. Installation & use guide ofmagnetic induction grow lights

(1) Screw up the nut of the hook,and prepare the enclosed M20 bolt.

Put the hook onto a fixed support, keep it steady.

(2) When installing the light, make sure the wires are sealed so that they are insulated and no electricity leaks.

(3) Do water proof protection to prevent water or electricity leakage.

(4)Don’t violate any fire safety rules when using the light.

5. Maintenance and after-sales direction ofmagnetic induction grow lights

(1)Make sure the power is off before maintaining.

(2)When changing the power pack, use the screw driver to open the rear cover, and take the power pack out. Wiring the AC power by connecting the red wire to the “L” of the power, blue or black wire should be connected to the “N” of the power, yellow or green wire should be connected to the⊥, DC power’s red line is for the positive of the power, black for the negative.

Attention: don’t connect to wrong polarity.

(3)Five years warranty.

Remarks: 3*2.5m wires have been enclosed when leaving the factory, 800mm in length. If there’re special requirements, please specify.

6. Packing details ofmagnetic induction grow lights

1. Neutral Package

2. package in carton with good inner supporting package with bubble paper ;1pcs/ctn independent packing

3. wooden packing if necessary

8. Application range ofmagnetic induction grow lights

Applicable to facility cultivation field, garden, and green house.

9. DoulightInduction high bay lampsource Advantages ofmagnetic induction grow lights

1. Better light distribution in transverse space, light uniformity and soft.

2 Use high quality special designed magnetic core material for induction lamp, low heat consumption, lower energy loss, stable performance, with better applicability and uniformity.

3. Mercury: Special dispensing of mercury, high purity, not volatile.

4. Phosphor: High-purity, rare earth fluorescent phosphor with luminous efficiency.

5. Gas: Purity rare.

10.Doulightmagnetic induction grow lightsballast Advantages

Long life and high efficiency Ballast:

1. American IC;

2. Japanese MOS tube;

3. Lightning protection device.

4. Special anti-surge protection circuit

5. Thick PCB, big panel, scientific circuit design

6. 6 patents

7. 5 years warranty.

11. Doulightmagnetic induction grow lightsLamp shade advantages

1.Material : Shell is made of shock resistant high pressure die-casting aluminum.

Light panel is made of heat resistant toughened glass (optional). Luminous efficacy is above 90%.

2.The heat dissipation structure ensures the luminous flux high output and reduces the attenuation of reflection coefficient.

3.Thickness: 1-1.2 mm, strong and tough

4.Reflector : High pure aluminum anodic oxidization reflector with special designed is better for light distribution effect, which support excellent optical performance.

12. Certification ofmagnetic induction grow lights

13.Our serviceofmagnetic induction grow lights

1. Replying your inquiry within 10 working hours.

2. Professional technical and commercial service provided by experienced staff.

3. Custom-made design is available, OEM&ODM are welcomed.

4. Our professional will calculate and provide excellent project for the use of light after you give us the using places, square, height, etc.

5. Providing 5 years warranty for low frequency lamps and 3 years for high frequency lamps and continuous after sales service.

6. Quick delivery.