For Android or IOS system, 4A*3 Output Current, DC5-24V, RGB LED Wifi Controller - SE-WF100 I

The dial code is used for setting LED-WiFi controller Ssid number, corresponding table as below. Form 0 to 15, have 16 code in total, so our Ssid number fasten to LN001 to LN016. That means use our product in same small area can set 16 mutual isolation LAN, once the dial code changed after switch was dialed, Ssid number immediately be modified, so you need to note that it need to search and connect again.

Technical Specification:

1. Dream Color can not open(error and breakdown),how to do?
Answer: If it is happened, just need to open again then you can solve. If it is still not open,that maybe thecompatibility of software to this phone is not very good,so you need to install the software to other phoneto use.

2. Dream Color can not control LED?
Answer: It maybe happen of wifi connection unsteadily.1,you can try shorten the distance of phone and
controller.2, you can enter SETUP reconnection(reinstall simulation to OFF),
if appear this ,if the network of you connect is LN0XX form,that is
maybe phone and wifi connection unsteadily, so retry several times, if it is still not useful, so you need
to change the phone.
Now the compatibility effect better is Samsung and HTC, we recommend to use this two model.3, close
the software and open again. One of above three ways can solve this problem,but if there can not get the
data ,you must be ensure the distance is not too far.

3. Install power supply and LED equipment

This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the left side (3,2,1,V+)is connect led equipment,the fifth interface is connect the anode V+ of power supply, the sixth interface is connect the cathode V_ of power supply. According to the rated voltage of led lamp, we supply power to controller ,and the rated voltage of
controller is 24V. As follows:

4. Connect three channels LED instruction

When connect three channels LED, you should put the Dream Color software switch to CD mode to use,only under this mode,you can control the LED's color,brightness and speed.Color disk adjust the color(Adjust process can be seen in the upper left corner R, G, B numerical with change),speed/brightness item adjust speed and bright("M"set the LED dynamic effect,"M"adjust the LED dynamic change.

5. Connect two channels LED instruction

When connect three channels LED, you should put the Dream Color software switch to CD mode to use,only under this mode,you can control the LED's color temperature,brightness and color temperature shortcut key settings.Color disk adjust the color temperature(meanwhile top left CW,WW numerical with change),brightness item adjust bright,"M"key set the special color temperature state.

6. Connect one channel LED instruction

When connect three channels LED, you should put the Dream Color software switch to CD mode to use,under this mode,use color disk control the LED's brightness,Adjust process can be seen in the upper left corner NM numerical with change.

Certificate:

Direction for use:
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power
2. Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote control and receiving head;
The key-press functions are shown in the table below (in accordance with the key position order):

Trade Terms:

1. Payment: 100% T/T, 30% before production, 70% before delivering, Western Union, Paypal.

2. Production lead time: 100~500pcs for 10 days, 500~1000pcs for 15 days.

3 Shipping: DHL, FedEx, UPS, TNT, Air or SEA.

4 Shipping port: SHENZHEN, Mainland China.

5 Discounts are offered based on order quantities.

Services:
1.Your inquiry related to our products or prices will be replied within 24hrs.
2. Well-trained and experienced staffs to help you locate the products in your best interest.
3. OEM & ODM production available.
4. 2 year warranty.
5. Protection of your sales area, design and all your private information.