600W hydroponics digital ballast - TD-600A

600W hydroponics digital ballast

1) HID HPS Digital Electronic Ballast for 600W HPS and MH Lamp
2) Voltage input range: 100Vac~268Vac
3) Rating V. In: 120/240Vac
4) Input frequency: 50Hz~60Hz
5) Power factor: >0.99
6) Efficiency: 95 %( Max)
7) THD: <10%
8) Output power: 600W
9) Current crest factor: <1.5
10) Output frequency: >30K Hz
11) Protection of short circuit: Available
12) Protection of open circuit: Available
13) Protection of ignition failure: Available
14) Protection of thermal: Available
15) Protection of end of lamp life: Available
16) Weight: 2.6kg/5.73lb
17) Max. Lamp distance from ballast: 15m/49ft
18) Operating temperature range: -30 º C~+50 º C
19) Dimension (L X W X H): 350X108X79 (mm)/ 13.780X4.252X3.110 (inch)
20) Max case temperature (T C): 90 º C
21) Safety and regulation: IEC61347
22) EMC: EN55015

This digitalballasts get an upgrade with their new dimmableballasts to allow greater flexibility in your growing area while reducing the cost of buying multipleballasts.

Ideal for when you want to avoid the heat of the summer months, if you need a boost for flowering or you want to establish young plants, these are excellent value at less than the price of two compactballasts with all the benefits of digital electronicballasts.

The 600Wballastcan be adjusted to 50%, 75%, 100% 600W and 600W Super Lumen or 250W 400W 600W and super lumen output

we recommend only using specific lamps for specific settings - if you want to use theballastat 400W then use a 400W lamp rather than turning down a 600W lamp, otherwise you will lose efficiency.

The TIDESTAR Digital Dimmableballastfeatures the same technology as the standard electronicballastincluding soft start technology and a two year guarantee, theseballasts are highly recommended .